If you want to know How To Fix The Yellow Light Of Death please keep reading. There is nothing worse for the owner of a Playstation III then to see the dreaded yellow light of death. The red light of death actually has some reasonable solutions with a high rate of success. The yellow light is quite different. It usually means there is a problem between one of the internal parts and the motherboard. Therefore, if the station is still under warranty it is best to ship it back to Sony for an exchange. It may cost you some shipping fees but that is much better then having to purchase a new box.
Next, Sony is very reasonable with their prices to repair the YLOD problem. There are many factory authorized repair centers too. However, the cost to repair the Playstation 3 with shipping fees is around half the price of a new unit. So it becomes a choice of repairing the damaged box or put up the difference to get a new one. If the unit is just out of warrantee the owner can feel quite frustrated right now. Nevertheless, if you do not have the money to repair or replace the box and are willing to try some unusual methods there are a few techniques that has been successful repairing the PS3 with a yellow light.
The problem stems from new materials being used during the manufacturing and soldiering process. These new materials are mandated by recent environmental laws. Simply put they are not as good as the older materials. Over time and for a variety of reasons the soldier connections work their way loose from the MB. When that takes place, the connection to the motherboard and the part is lost. Depending on which part has lost the connection the unit will stop working. This is to prevent electrical fires caused by the short circuit. The yellow light alerts the owner to this condition.
One way to solve this problem is to solider the broken connection. However, it is difficult to detect what part requires the repair. The pieces are small, the connections are tiny, and the interior is cramped. This is why so many people simply choose to return the unit for repair when they have the money. That is in a perfect world though. Some folks do not have the money. For them there are some homegrown solutions. The Xbox red ring of death can be repaired by cooking it. Likewise, the yellow light of death on the Playstation III can sometimes be fixed by cooking it. What is cooking?
Cooking the unit is not hard to do. It will require the use of a heat gun. A heat gun looks like a blow dryer for the hair but it gets much hotter. It can be rented from any company that rents construction tools. A hair dryer will not work because it does not get hot enough. Once you have the heat gun turn the PS around with the rear vents facing you. Make sure it is unplugged. Turn the heat gun on and set it to medium heat. Blow the hot air into the back of the box for about 10 minuets. Then place the box in front of a fan to cool it down. With any luck, the solider joint will have reseated itself and the unit will now work. If it does not work, repeat the process again but this time blow the hot air for longer then 10 minuets. Try 15 minuets this time. After three tries if the unit still fails to come on then send it to Sony for repair or replace it. So, now you know How To Fix The Yellow Light Of Death then just do it.
